Your Site Title

If you're looking for Welding Equipment, then look no further. The Donegal Gas Co. Ltd provide a wide range of welding equipment and are also a distributor of Murex and Esab products

Operating from a 230v single phase power supply this compact TIG/MMA power source has duty cycles of 150A @ 35% and 200A @ 25% respectively. For TIG welding HF and LiftArc TM and for MMA welding Hotstart and ArcPlus TM are inbuilt as standard

Tradestig AC/DC 161iS, a small and portable AC and DC TIG welder utilising inverter technology. The machine can weld aluminium at up to 160A, equivalent to some 4-5mm thickness, from a 230V 13A domestic supply

Capable of welding most materials in thickness' ranging from 0.5-6mm the machines have a setting range for TIG 3-150 amps and 3-200 amps respectively. Single phase 230V supply, the Tradestigs are compact and easily transported using the conveniently located carrying handle.

A range of TIG Torches which include both air and water cooled options.

Transtig Dual 151i This inverter based electronic controlled power source offers superb DC arc characteristics for TIG welding from either 110V and 230V supplies. Incorporating non contact electronic arc ignition with inbuilt gas pre-flow, current slope up time, adjustable current slope down and post flow times.10 to 150A output, 150A at up to 60% duty.

Transtig DC 200i & 250i The Transtig DC 200i and DC 250i operate from a 415v 3-phase supply. The DC 250i is the more powerful of the two machines with the capability of 250A at 35% duty cycle. With exceptional weld characteristics in both TIG and MMA welding modes, the DC 200i & DC 250i are the ideal for high quality, precision production work, with the 250i having the ability to be fitted with an integral torch water cooling unit

Transtig AC/DC 201iS, 203iS, 253iS, 353iS The Murex Transtig AC/DC 201iS, 203iS, 253iS and 353iS provide the best in TIG or MMA welding in either AC or DC process modes.

The 201iS operates from a single phase 220-240V supply while the 203iS, 253iS and 353iS all operate from 3 phase 400-440V supplies.

Utilising only 230V single phase electricity and a supply of compressed air the superb new Sabre-arc 351i can clean cut 12mm mild steel or 8mm of aluminium. Delivering up to 35A cutting current at 40% duty cycle the 351i is combined with the excellent Murex PT-50 Plasma torch.

A portable manual plasma cutting unit for workshops and repair and maintenance work. Connects to single phase 230V 16A time-lag fuse and to compressed air. All materials that conduct electricity can be cut ie mild steel, alloyed (stainless) steels, copper and aluminium.

The LPH 50 is designed for cutting of plates up to 12mm thick. On the front panel a cutting current of 30A or 50A can be selected, in order to match the power requirements to the cutting conditions. The LPH 50 is equipped with an air cooled torch, the PT 27, with 7.6m hose package.

Powercut 650 is a very powerful plasma cutting package in a tough casing making it suitable for most plasma cutting applications. Cuts mild steel with quality from thin plate up to 16mm (severs 19mm). Also cuts aluminium and stainless steel.

The Powercut 1500 Plasmarc 

The Powercut 1500 is a very powerful plasma cutting and gouging package in a tough casing making it suitable for most plasma cutting applications. Cuts mild steel from thin plate up to 40mm. Gouge grooves approx 8x8mm per straight run at a metal removal rate of approx 7.6kg/hr. Also cuts and gouges aluminium and stainless steel.

A Portable 110V/240V "Auto-Switch" Air Plasma Cutting Machine which on 240V supplies cuts up to 12.5mm mild steel and 8mm aluminium at 40% duty cycle. The unit is small and portable, weighing on 13kg and is combined with the superb Murex PT-50 Plasma Torch with 4.5m cable.

The LPH 80 is designed for cutting of plates up to 25mm thick. On the front panel the cutting currentcan be set in three steps of 40A, 60A or 80A, in order to match the power requirements to the cutting conditions. The LPH 80 is equipped with an air cooled torch, the PT 27, with 7.6m hose package.

The LPH 120 is designed for cutting of plates up to 35mm thick. On the front panel the cutting current can be set in three steps of 60A, 90A or 120A, in order to match the power requirements to the cutting conditions. The LPH 120 is equipped with an air cooled torch, the PT 25, with 7.6m hose package

Powercut 875 is a very powerful plasma cutting package in a tough casing making it suitable for most plasma cutting applications. Cuts mild steel with quality from thin plate up to 32mm and also cuts aluminium and stainless steel.

ESP-150 is a versatile, all encompassed heavy duty water cooled plama cutting and gouging system which is ideal for manual and mechanised applications. Cuts mild steel up to 51mm.